Yantai SMT processing safety is the most important. Let's learn more about it

Today, I believe everyone has gained a very deep understanding of SMT processing in Yantai through this website. Today, we will focus on explaining the safety knowledge we should pay attention to during the SMT processing process.

Safety Precautions during SMT Processing:

1. First: The equipment should be used according to the SMT machine operating procedures, and work should only begin after all safety switches on the SMT machine are closed.

2. Second: Corresponding equipment requires designated operators; unauthorized personnel must not operate the machinery without permission.

3. Third: When opening the reflow oven, care should be taken to prevent burns, and gloves should be worn at the same time.

4. Fourth: When maintaining equipment, operations should be carried out with the equipment stopped. If special circumstances prevent shutdown, at least one person should supervise the operation.

5. Fifth: During equipment operation or adjustment, if an accident occurs, the emergency stop button should be pressed immediately, or the power switch should be pulled to stop the equipment immediately.

6. Sixth: Avoid direct skin contact with flux during work; use tools such as gloves.

7. Seventh: When replacing certain parts, it should be done with the machine stopped, and the emergency stop button should be locked to prevent misoperation by others.

8. Eighth: Try to keep the equipment's panels closed as much as possible so that dust can be effectively sucked away by the exhaust system, keeping the air fresh and the environment clean.

9. Ninth: Regularly maintain the air compressor and replace the air compressor oil.

10. Tenth: Turn off the main power switch after work or during holidays.

So, isn't the summary from Yantai Zhange Electronics Co., Ltd. very accurate? In short, choosing us is the right decision. Continue to follow us, and there will be different surprises every day.